Please Note

Etisalat customer care number is 101 or 800 101. I am not related to Etisalat, blog was prepared with the help of Internet resources. More help ? onabin@gmail.com

Report cyber abuse & blackmail on al almeen 8004888

Need information about Du Home Services ? Click Here

Search Solutions

ISDN BRI Script for the ISDN Device Configuration for Etisalat


ISDN BRI Service Setup


  • Connect your ISDN service with computer and access the device console using Hyper Terminal

    -------------------------------------------------------------------------------------------------
    Quick Trick for Hyper Terminal activation in Windows 7

    Solution :
    There is an easy way to activate or show the Hyper terminal in windows 7, just go to a computer that is still using Windows XP, then Copy the two  files associated with hyper terminal, hypertrm.exe and hypertrm.dll

    The location of files (in Windows XP):
    C:\Program Files\Windows NT\hypertrm.exe
    C:\WINDOWS\system32\hypertrm.dll

    Then save it to your computer Windows 7, (create a new folder and paste those 2  files )
    Execute the file  hypertrm.exe  to run the Windows Hyper Terminal

    -------------------------------------------------------------------------------------------------
  • Now run the below script by customizing all necessary details marked with bold letters
 Here is the working script for ISDN BRI Telephone lines for typical ISDN Access Device (IAD)
 [http://www.oneaccess-net.com/onesite/enterprise-access-routers/multi-service-data-and-voice-router/one100dm.html]



no reboot recovery-on-error
logging buffered size 16364
clock timezone your-time-zone              ! example kathmandu
console timeout 10800
set multiple-conf-sessions enable
logging buffered debug
hostname hostname                                ! example my_office
interface FastEthernet 1/0                     ! define fast ethernet interface port here
ip address 20.20.20.20 255.255.240.0  ! define ip address here as allocated
exit

interface bri 5/0                                       ! define bri interface port here, this is default
shutdown
isdn
application-interface voip
protocol-emulation isdn-nt
permanent-layer1
exit
no shutdown
execute
exit

ip route 0.0.0.0 0.0.0.0 20.20.20.1        ! define gateway ip here
no snmp set-write-community private
no snmp set-read-community public
voice-default
voice-port 5/0
clock-source free_run
echo-disable voicemodem
dtmf-detection-criterion severe
sntp-time
isdn-reverse-ringback-tone
isdn-setupack-inband
exit

dial-peer voice pots 0
insert-calling-number account-number i.e. calling-number alt-num alternate-msn-number replace 
pots-group 0
port 5/0
no shutdown
exit

dial-peer voice voip 0
sig-protocol sip
dtmf-relay in-band
fax-relay t38orpassthrough priority t38 requested successively
jitter-compensation adaptive
modem-passthrough
passthrough-symetric enable
passthrough-mode reinvite
voip-coder-profile 0
t38-ecm disable
sip-sdp-on-alert
sg3tog3 enable
no shutdown
exit

voice-routing
route 2
dial-peer voip 0
prefix-type outgoing called last
prefix . timer
no loopback-routing
exit

route 50
dial-peer pots-group 0 ua-sip
sip-authentication account-number  password
sip-username account-number
prefix-type outgoing called last
prefix account-number length 9
no loopback-routing
exit

route 51
dial-peer pots-group 0 ua-sip
sip-authentication alternate-msn-number   password
sip-username alternate-msn-number
prefix-type outgoing called last
prefix alternate-msn-number length 9
no loopback-routing
exit

route 100
dial-peer pots-group 0
prefix-type incoming calling last
prefix - length 0
insert-calling account-number type 2 plan 0 presentation 0 screening 0
no loopback-routing
exit
route 101
dial-peer pots-group 0
prefix-type incoming calling last
prefix account-number length 9
no loopback-routing
exit

route 102
dial-peer pots-group 0
prefix-type incoming calling last
prefix alternate-msn-number length 9
no loopback-routing
exit

route 103
dial-peer pots-group 0
prefix-type incoming calling last
prefix . length 0
translate . account-number calling
no loopback-routing
exit
exit

sip-gateway
shutdown

outbound-proxy your-outbound-proxy ip (or dns ip if no-proxy)
reg-dns-add your-outbound-proxy ip (or dns ip if no-proxy)
prox-dns-add your-outbound-proxy ip (or dns ip if no-proxy)
sip-asserted-id
reg-ka 600
payload-64k-unrestricted 100
gw-interface fastethernet 1/0              ! this is the fast ethernet port used before
softswitch-profile give-profile-name

device-host-name your-outbound-proxy ip (or dns ip if no-proxy)
uri-contact ip-address
no shutdown
exit

voip-coder-profile 0
codec 0 g711a 20
codec 1 g711u 20
codec 2 g729ab 20
exit

Note:
1) Save your configuration after the last line execution.
2) You need Broadband Ethernet (or ADSL Ethernet) service as a Feeder to IAD device on WAN (or ADSL) interface.
3) You should verify telephone operation using ISDN Telephone at BRI Port of the device (default Line 0)

4 comments:

  1. After configuring ONEACCESS device customer is using another device to enable voice instead ISDN telephone,can you please help to mention the name and function of that device.

    ReplyDelete
    Replies
    1. Dear Syed, please share the pics, how should I know which devices are being used by your customer ?

      Delete
    2. my email id is onabin@gmail.com

      Delete
  2. We are a UK leased line provider with a price promise guarantee. We also offer you an instant leased line quote on our website.
    leased line providers

    ReplyDelete